S220, Dew point sensor, -100...+20°CTd

S220 Dew point sensor/sensor for compressed air and gases (-100…0°Ctd)
Art.
S699 2220

Why buy from Ants?

High-grade industrial quality
Extended WARRANTY
Always Our award-winning Ants service
Multilingual documentation included
The SUTO dew point sensor S220 provides reliable and long-term stable dew point monitoring in an industrial environment. SUTO uses a new sensor technology that provides superior signals at very low moisture levels, providing reliable measurements down to -100°CTd. A stainless steel mesh filter with a pore size of less than 30 µm protects the sensor from particles. It is designed for applications where very low moisture levels need to be detected. The measured dew point is output via a 4…20 mA signal (3-wire). Sensor parameters such as analog output scaling, physical units, can be easily changed using the SUTO service kit. Characteristics - Very fast response time provides a safe and reliable indication when dew points are outside the valid range - Its small size makes it ideal for drier installations - Measures dew points down to –100 °C Td - New SUTO sensor technology - 1x4...20mA - IP65 housing provides rugged protection in harsh industrial environments - Can be installed directly in dryers by means of G 1/2” thread - High accuracy of ±2°Ctp - M12 plug
More Information
Connection G 1/2"
Accuracy Dew point +- 2ºC (-6...0°Ctp / +20...+50°Ctp) Temperature +- 0.3ºC Press 0.5% F.S.
dewpoint sensor Polymer + QCM
Pressure sensor Piezo
Power connection 15 … 30 VDC
Response time Responstijd -80°Ctd > -20°Ctd = 20 sec. Responstijd -20°Ctd > -80°Ctd = 180 sec.
Temperature sensor Pt100
Measuring gas conditions -30 … +70°C
Transport temperature -30 … +70°C
Display 0,66" OLED display
Classification IP65 / CE
Ambient temperature 0 … +50°C
Working temperature Medium temp. -30...+70ºC environment temp. 0...+50ºC Rel humidity 0...100%
Working pressure -0,1 ... 1,6 MPa
Anologue output 4…20 mA 3 draads
Power 15...30VDC
Weight 180 gram